The Perfect Printing Pouch

Hold pouch by the colored ribbon.

Note: Prior to first use, tap pouch on a hard surface until powder is visible. Repeat when necessary to keep the felt saturated with powders.

Applying like a powder puff, gently wipe the printing surface with the pouch to evenly distribute the powders. Shake or blow to remove any excess powder. A light application of powder is usually all that is needed.

Make sure your printer is set for normal paper and print quality. Do not use transparency setting as it puts out a minimum of ink. Send the paper through the printer so it prints directly onto the treated surface. Let dry briefly. Although you may be able to work with it immediately, the printing can be smeared if not totally dry.

Note: To set the ink permanently on transparencies, polymer clay, mica-coated papers and other very slick, non-porous surfaces, spritz with a spray fixative.